No updates noted as of 09 March 2017
Guideline on the Chemistry of Active Substances, 15 November 2016, EMA/454576/2016
The European Medicines Agency (EMA) has published a “Guideline on the Chemistry of Active Substances,” setting out information required by Directive 2001/83 with respect to the manufacture and control of active substances used in a medicinal product. The guideline replaces the “Note for guidance on chemistry of new active substances” (CPMP/QWP/130/96, Rev. 1) and “Chemistry of active substances” (3AQ5a), and covers new and existing active substances in a single guidance document. The guideline is applicable to active substances that have been developed following a “traditional” or “enhanced” approach as described in ICH Q8-11 (Refs 1-4) or a combination of these. The new guideline takes effect in May 2017.
No updates noted as of 09 March 2017
18 January 2017
Health Canada is pleased to announce the release of the following draft guidance documents for a 90-day stakeholder consultation from 18 January 2017 to 18 April 2017:
GUI-0001: Good Manufacturing Practices (GMP) Guide for Drug Products is applicable to all fabricators, packagers/labelers, testers, importers, distributors, and wholesalers who work with drugs. The following changes were made:
GUI-0023: Risk Classification Guide for Drug Good Manufacturing Practices Observations is applicable to all fabricators, packagers/labelers, testers, importers, distributors, and wholesalers who work with drugs. The following changes were made:
GUI-0031: Good Manufacturing Practices for Medical Gases is applicable to all fabricators, packagers/labelers, testers, importers, distributors, wholesalers, and home care providers who work with medical gases. The following changes were made:
GUI-0080: How to Demonstrate Foreign Building Compliance with Drug Good Manufacturing Practices is applicable to all Canadian importers who work with drugs. The following changes were made:
GUI-0119: Annex 1 to the Good Manufacturing Practices Guide – Manufacture of Sterile Drugs is applicable to all fabricators, packagers/labelers, testers, importers, and distributors who work with sterile drugs.
Health Canada is seeking feedback on a proposal to adopt the international GMP guidance published by the Pharmaceutical Inspection Cooperation Scheme (PIC/S) as described in the proposed Health Canada guide.
http://www.hc-sc.gc.ca/dhp-mps/consultation/compli-conform/gmp-del-bpf-epp-eng.php
Integrated Addendum to ICH E6(R1): Guideline for Good Clinical Practice E6(R2), 09 November 2016
Since the finalization of the ICH Good Clinical Practice (GCP) Guideline in 1996, the scale, complexity, and cost of clinical trials have increased. Evolutions in technology and risk management processes offer new opportunities to increase efficiency and focus on relevant activities. This guideline has been amended to encourage the implementation of improved and more efficient approaches to clinical trial design, conduct, oversight, recording, and reporting while continuing to ensure human subject protection and the reliability of trial results. Standards regarding electronic records and essential documents intended to increase clinical trial quality and efficiency have also been updated. In this “Integrated” Addendum, changes were integrated directly into several sections of the parental guideline.
Impurities: Guideline for Residual Solvents Q3C(R6), 20 October 2016
The core tripartite harmonized ICH Guideline was finalized under Step 4 in July 1997. This guideline recommends the use of less toxic solvents in the manufacture of drug substances and dosage forms, and it sets pharmaceutical limits for residual solvents (organic volatile impurities) in drug products. A maintenance process has been carried out to revise Permitted Daily Exposure (PDE) as new toxicological data for solvents become available.
Limit values for three residual solvents in drug products were revised based on the newly recognized toxicity data: lower PDE for N-Methyl Pyrrolidone kept in Class 2 (health-based) and for Tetrahydrofuran and Cumene placed in Class 2 from Class 3 (not health-based).
Both revisions (PDE for THF and PDE for NMP) reached Step 4 of the process in September 2002. A corrigendum to the calculation formula for NMP was subsequently approved on 28 October 2002. According to the new coding rule, the revisions were incorporated into the core guideline in November 2005.
In February 2009, Table 2, Table 3, and Appendix 1 of the Core Guideline were updated to reflect the revision of the PDEs for N-Methyl Pyrrolidone and Tetrahydrofuran (Q3C(R4)).
The most recent maintenance of the guideline, resulting in the current Q3C(R6) version, involved the revision of the PDE for Methyl Isobutyl Ketone (MIBK) and the addition of Triethylamine (TEA) as a new solvent. Based on new data, MIBK was moved from Class 3 (solvents with low toxic potential) to Class 2 (solvents to be limited). The new solvent Triethylamine was included in Class 3 (solvents with low toxic potential).
No updates noted as of 09 March 2017
No updates noted as of 09 March 2017
ISPE Baseline® Guide: Oral Solid Dosage Forms (Third Edition), November 2016
This is the third edition of the ISPE Baseline® Guide for New and Renovated Oral Solid Dosage (OSD) facilities. It focuses on compliance with the current regulatory expectations. Technical content within this Baseline Guide covers pharmaceutical facilities for the manufacture of OSD forms, including tablets, capsules, and general powders. The guide may also be applied to pilot and clinical supply facilities and is intended to supplement Good Engineering Practices (GEP) with suggested approaches to Good Manufacturing Practices (GMP).
The ISPE Baseline Guide: OSD Forms is intended to be used by various industry professionals for the planning, design, engineering, construction, commissioning, qualification, and operation of both new and renovated pharmaceutical OSD facilities. It is intended to be used to develop technically sound and compliant solutions while offering flexibility to meet specific facility and project needs.
The ISPE Baseline Guide: OSD Forms is intended to offer a tool for consistent framework for regulatory interpretation, while still allowing a flexible, innovative, and compliant approach to facility design, construction, commissioning, and qualification. This approach is intended to allow manufacturers to better serve their customers by helping reduce costs and improve product quality. Additionally, this Baseline Guide will provide an overview of potential new technologies that are being applied selectively in the industry.
Some of the major enhancements and revisions to the third edition include:
http://www.ispe.org/publications-guidance-documents/oral-solid-dosage
February 2017
PDA’s newly released Technical Report No. 77 (TR 77), The Manufacture of Sterile Pharmaceutical Products Using Blow-Fill-Seal Technology provides recommendations specific to the operation of blow-fill-seal (BFS) technology for the manufacture of sterile pharmaceuticals (e.g., ophthalmic, parenteral, and inhalation). The intent of this document is to provide supplemental information to assist the user with the interpretation of international standards and regulatory guidance from the perspective of BFS operations. Consideration is given to specific aspects of BFS operations not covered in published information.
This technical report addresses considerations for BFS technology related to the installation and operation of machinery and the evaluation of related materials and final product containers. Support areas (e.g., laboratory, solution compounding, and gowning airlocks) are not considered specific to blow-fill-seal and are not included within the scope of this document. This technical report is intended as a guide for the industry and is not meant to replace or duplicate any existing regulatory guidance.
Revision of PIC/S GMP Guide (PE 009-13)
Geneva, 22 December 2016: The following chapters of the PIC/S GMP Guide have been revised:
The revised chapters of the PIC/S GMP Guide are based on the equivalent chapters of the EU GMP Guide, with some minor differences in language. Chapters 1, 2, and 7 have been aligned to ICH Q10, and “Pharmaceutical Quality System” principles have been integrated. A section on consultants has been added in Chapter 2. The scope of Chapter 7 has been expanded beyond “contract manufacture and analysis.” Chapters 1 and 7 have been renamed to reflect the changes. In Chapter 6, all sections have been reviewed and amended, and a new section on “Technical Transfer of Testing Methods” has been added.
The revision was successfully completed by the PIC/S Sub-Committee on the Harmonisation of GM(D)P, led by Paul Gustafson (Canada/RORB). The revised GMP Guide (PE 009-13) will be effective on 01 January 2017. All non-EEA Participating Authorities of PIC/S (and Applicants) have been invited to transpose the revised chapters of the PIC/S GMP Guide into their own GMP Guides.
To download the revised GMP Guide (PE 009-13), please consult the page “Publications“.
No updates noted as of 09 March 2017
Akorn Pharmaceuticals, Inc.
https://www.fda.gov/ucm/groups/fdagov-public/@fdagov-afda-orgs/documents/document/ucm525311.pdf
Bausch & Lomb, Inc.
https://www.fda.gov/ucm/groups/fdagov-public/@fdagov-afda-orgs/documents/document/ucm516150.pdf
Zimmer Biomet, Inc.
https://www.fda.gov/ucm/groups/fdagov-public/@fdagov-afda-orgs/documents/document/ucm537137.pdf
Denttio, Inc., 23 February 2017
https://www.fda.gov/ICECI/EnforcementActions/WarningLetters/2017/ucm543694.htm
Megafine Pharma (P) Limited, 24 February 2017
https://www.fda.gov/ICECI/EnforcementActions/WarningLetters/2017/ucm544066.htm
Morton Grove Pharmaceuticals, Inc., 17 February 2017
https://www.fda.gov/ICECI/EnforcementActions/WarningLetters/2017/ucm545133.htm
2016 Medical Gas Container – Closure Rule, Questions and Answers, Guidance for Industry, (Small Entity Compliance Guide), January 2017
This guidance is intended to help small businesses better understand and comply with recently issued regulations on current good manufacturing practices (CGMP) and labeling for medical gasses. On 18 November 2016 (81 FR 81685), the FDA published a final rule called ″Medical Gas Containers and Closures: Current Good Manufacturing Practice Requirements” (Container- Closure Rule or final rule). The final rule amends certain CGMP regulations regarding medical gases to increase the likelihood that the contents of medical gas containers will be accurately identified on labeling and by container coloring and to reduce the likelihood of the wrong gas being connected to a supply system by requiring gas-specific outlet connections. The final rule also revises an existing labeling regulation (21 CFR 201.161) that exempts listed medical gases from certain otherwise-applicable labeling requirements under specified conditions (e.g., meeting the applicable medical gas labeling and container closure requirements, including certain warning statement(s)).
https://www.fda.gov/ucm/groups/fdagov-public/@fdagov-drugs-gen/documents/document/ucm537232.pdf
Guidance for Industry and FDA Staff: Current Good Manufacturing Practice Requirements for Combination Products, Final Guidance, January 2017
This guidance describes and explains the final rule on CGMP requirements for combination products (final rule as codified in 21 CFR part 4) that the FDA issued on 22 January 2013. Although CGMP regulations were in place to establish requirements for drugs, devices, biological products, and Human Cells, Tissues, and Cellular and Tissue-Based Products (HCT/Ps), there were no regulations to clarify and explain the application of these CGMP requirements to combination products prior to the issuance of the final rule. The final rule was intended to provide clarification and specify how compliance with applicable CGMP requirements may be demonstrated.
https://www.fda.gov/downloads/RegulatoryInformation/Guidances/UCM429304.pdf
Regeneca Worldwide, a Division of VivaCeuticals, Inc., Issues a Nationwide Recall of Its Products, 09 March 2017
Regeneca Worldwide, a division of VivaCeuticals, Inc. is conducting a nationwide recall of its entire line of herbal and dietary supplement products pursuant to a Consent Decree entered by the federal court for the Central District of California. This recall applies to all products manufactured and sold between 01 June 2011 and 08 February 2017. These products include but are not limited to RegeneSlim, RegenErect, RegeneArouse, RegeneBlend, RegeneBoost, RegeneBlast, and RegeneFit. All lot numbers are included in this recall. Regeneca products were sold nationwide online using the company’s websites and through a direct sales force within the United States and Puerto Rico for both consumption and retail sales.
https://www.fda.gov/Safety/Recalls/ucm545842.htm
A&H Focal Inc. Issues Nationwide Recall of 21 Products Marketed as Dietary Supplements & One Cosmetic Product Due to the Possible Presence of Undeclared Erectile Dysfunction Ingredients, 07 March 2017
A&H Focal Inc. is voluntarily recalling all lots of the following products because many of these products have been historically tested by the FDA and found to contain PDE-5 Inhibitors (e.g., sildenafil, tadalafil, and vardenafil), the active ingredient in an FDA-approved drug for erectile dysfunction (ED), making these tainted dietary supplements unapproved drugs.
These undeclared active ingredients pose a threat to consumers because the PDE-5 Inhibitors may interact with nitrates found in some prescription drugs (e.g., nitroglycerin) and may lower blood pressure to dangerous levels. Consumers with diabetes, high blood pressure, high cholesterol, or heart disease often take nitrates.
https://www.fda.gov/Safety/Recalls/ucm545394.htm
Exela Pharma Sciences, LLC Issues Voluntary Nationwide Recall of Ibuprofen Lysine Injection, 20 Mg/2 Ml (10 Mg/Ml) Due to Particulate Matter, 08 February 2017
In Lenoir, NC, Exela Pharma Sciences, LLC (“Exela”), in association with marketer X-Gen Pharmaceuticals, Inc. (“X-Gen”), is voluntarily recalling lot number PLND1613 of Ibuprofen Lysine Injection, 20 mg /2 mL (10 mg/mL), vials at the hospital or user level. Some of the vials have been found to contain particulate matter.
Risk Statement: Particulate matter has the potential to block blood vessels, provoke an immune reaction, and/or lead to microinfarcts, which could be life threatening. Neither Exela nor X-Gen has received any reports of adverse events related to this recall.
https://www.fda.gov/Safety/Recalls/ucm540769.htm
Hospira Issues a Voluntary Nationwide Recall for One Lot of Vancomycin Hydrochloride for Injection, USP Due to the Presence of Particulate Matter Within a Single Vial, 24 January 2017
Hospira, Inc., a Pfizer company, is voluntarily recalling one lot of Vancomycin Hydrochloride for Injection, USP (NDC: 0409-6510-01, Lot 591053A, Expiry Date: 01 November 2017), at the hospital/retail level due to a confirmed customer report of the presence of particulate matter within a single vial.
In the unlikely event that the particulate is administered to a patient, it may result in local swelling, irritation of blood vessels or tissue, blockage of blood vessels and/or low-level allergic response to the particulate. The risk is reduced by the possibility of detection, as the label contains a clear statement directing the physician to visually inspect the product for particulate matter and discoloration prior to administration.
https://www.fda.gov/Safety/Recalls/ucm538214.htm
Draft for Comment: Stability Testing of Active Pharmaceutical Ingredients and Finished Pharmaceutical Products, January 2017